IQsolv REDCOAT is a new generation of exposed roofing waterproof coating engineered for maximum durability. Formulated with a premium rubber emulsion base, REDCOAT is grafted with water-based epoxy resin and refined using advanced additives.
The result is an environmentally friendly, polymer-elastic material that provides a seamless, high-strength barrier against the elements.
If you are a business/startup who wants to order this product Contact us on info@sreecheminnovations.com
Choose options
A polymer-elastic exposed-roof waterproofing coating made from premium rubber emulsion grafted with water-based epoxy resin. It creates a seamless, durable red barrier as the protective top layer of a complete roof waterproofing system.
Coverage used here: 1,000 sq ft ≈ 20 kg for 2 coats. Actual consumption can vary with porosity, texture, preparation and application loss.
Enter the total roof or surface area in square feet.
Use RedCoat as an exposed waterproofing system. Follow the TDS supplied with your batch and never trap dirt or moisture below the coating.
Wash the surface thoroughly. Remove dirt, moss, loose material and contamination, then allow the roof to dry completely.
Apply two coats of SeelanShield as the specified waterproofing base and allow the system to set as directed.
Use 1 part RedCoat with 0.2 parts clean water. Mix until the coating is completely uniform.
Use 1 part RedCoat with 0.1 parts water. Keep at least 4 hours between coats.
Keep the exposed finish protected from rain, ponding and traffic while it cures. Inspect outlets, edges and thin spots before exposure.
System preparation, dilution and exposed-roof application guidance for contractors.
For the first coat, add 1 litre of water. For a subsequent coat, add 0.5 litre of water.
No. Wash away dirt and moss, remove loose material and let the surface dry completely before building the waterproofing system.
The published RedCoat system specifies two SeelanShield coats as the waterproofing base before the exposed RedCoat finish.
Allow at least 4 hours between coats. Cool, humid or poorly ventilated conditions can extend the required drying time.
Opened chemical packs are generally not returnable. Check the store refund policy before purchase and contact support if a sealed pack arrives damaged.