For hot terraces, east-west roofs and overhead tanks - heat protection with waterproofing.
If you are a business/startup who wants to order this product Contact us on info@sreecheminnovations.com
Choose options
Acrylic thermo-shield coating with ceramic microsphere technology. It reflects IR/UV heat so roof surfaces run cooler—useful on terraces, sun-facing walls and overhead tanks in Indian summers. It also adds a waterproofing benefit on suitable substrates.
Official coverage used here: 1000 sq ft = 30 kg for 3 coats. Add 10–15% for very porous or uneven surfaces.
Enter the roof, terrace or tank surface area in square feet.
Simple job-site steps. Always follow the TDS supplied for your batch.
Remove dirt, moss and loose particles. Repair major cracks and active leaks first.
Use the first coat as primer, diluted approximately 1:0.5 (product:water).
Apply the second and final coats at approximately 1:0.3–0.4 dilution, keeping at least 6 hours between coats.
Allow full cure before heavy rain or ponding. Recoat thin spots and keep leftover material sealed, cool and upright.
Full technical data for applicators and engineers. Share it with your contractor.
At 1000 sq ft = 30 kg for 3 coats, 500 sq ft needs about 15 kg. Add an allowance if the slab is porous or uneven.
Yes, if the surface is sound and dry and the coating has enough time to cure fully before rain or standing water.
Garmikool adds a waterproofing benefit on suitable substrates, but it is not a substitute for structural crack repair or treatment of active leaks.
Small, accessible areas can be DIY if surface preparation and dilution instructions are followed. Use a trained applicator for large roofs, difficult access or active leakage.
Opened chemical packs are generally not returnable. Check the store refund policy before purchase and contact support if a sealed pack arrives damaged.
